WinNUPRATM

winnupr2.gif (1590 bytes)

Up WinNUPRA - Home

horizontal rule

Users Group >> Updates

WinNUPRA 4.0

No Updates available at this point.  The final verified and validated Version 4.0 was released on August 25th, 2011.

 

WinNUPRA 3.1

No Updates available at this point.  The final verified and validated Version 3.1 was released on May 3rd, 2007.

 

WinNUPRA 3.0

Service Release 4 for WinNUPRA 3.0.

This Service Release includes the Calculation Module and Fault Tree Module.  It fixes the problems described in Error Notification WN30-14 and WN30-15.

It also includes an update to the Event Tree Module.  A Basic Event could not be found in the BED file during the Event Tree Quantification when the Basic Event Name contained special characters, like the '<' and '>' symbols.  Although we are discouraging users from using these special characters, the Event Tree Module was updated to handle these basic event names.

THIS SERVICE RELEASE HAS BEEN TESTED, BUT NOT VERIFIED AND VALIDATED IN A FORMAL QA PROGRAM.  THIS WILL BE DONE IN WinNUPRA 3.1.

The Modules are available as stand alone executables.  Download the file from the link below.  Then unzip the executables and copy them into your WinNUPRA Program Folder.

Since this Service Release is an update for certain Modules only, please read these Upgrade Instructions for a complete list of 3.0 Service Releases.

You need to have WinNUPRA 3.0 installed on your computer to successfully run these Modules.  If you have problems downloading the file or running the updated modules, please contact me at dspiegel@scientech.com.

File: winnupra30sr4.zip (499 k).

 

Service Release 3 for WinNUPRA 3.0.

The V&V testing for Service Release 3 is finished.  The V&V report is being reviewed right now.  The final updates to the Calculation and Results Modules are provided below.

The Modules are available as stand alone executables.  Download the file from the link below.  Then unzip the executables and copy them into your WinNUPRA Program Folder.  There is also a Word document included which describes the changes implemented in this Service Release.

Since this Service Release is an update for the Calculation Module and Results Module only, please read these Upgrade Instructions for a complete list of 3.0 Service Releases.

You need to have WinNUPRA 3.0 installed on your computer to successfully run these Modules.  If you have problems downloading the file or running the updated modules, please contact me at dspiegel@scientech.com.

File: winnupra30sr3.zip (474 k).

 

Service Release 2 for WinNUPRA 3.0.

This Service Release fixes all problems in Error Report WN30-08 through WN30-11.

You need to have WinNUPRA 3.0 installed on your computer to successfully install this Service Release.  Click on the file name to download the Update.  After downloading, unzip the file and double click on WINNUPRA30SR2.MSP.   Then follow the instructions on the screen.  If you have problems installing this Service Release, or if you need an installation disk, please contact me at dspiegel@scientech.com.

THIS SERVICE RELEASE HAS BEEN TESTED, BUT NOT VERIFIED AND VALIDATED IN A FORMAL QA PROGRAM.  THIS WILL BE DONE IN THE SERVICE RELEASE 3 FOR CALCULATION AND RESULTS MODULES AND IN WinNUPRA 3.1 FOR THE OTHER MODULES.

THIS SERVICE RELEASE ALSO INCLUDES THE UPDATES OF SERVICE RELEASE 1.

File: winnupra30sr2.zip (554 k).

 

Service Release 1 for WinNUPRA 3.0.

This Service Release fixes all problems in Error Report WN21-18 through WN30-07.

You need to have WinNUPRA 3.0 installed on your computer to successfully install this Service Release.  Click on the file name to download the Update.  After downloading, unzip the file and double click on WINNUPRA30SR1.MSP.   Then follow the instructions on the screen.  If you have problems installing this Service Release, or if you need an installation disk, please contact me at dspiegel@scientech.com.

THIS SERVICE RELEASE HAS BEEN TESTED, AND ALSO VERIFIED AND VALIDATED IN A FORMAL QA PROGRAM.

File: winnupra30sr1.zip (359 k).

 

WinNUPRA 2.1

Service Release 3 for WinNUPRA 2.1.

This Service Release fixes all problems in Error Report WN21-11 through WN21-15.

You need to have WinNUPRA 2.1 installed on your computer to successfully install this Service Release.  Click on the file name to download the Update.  After downloading, extract the file, run the executable NUPRASR3.EXE and follow the instructions on the screen.  If you have problems installing this Service Release, or if you need an installation disk, please contact me at dspiegel@scientech.com.

THIS SERVICE RELEASE HAS BEEN TESTED, AND ALSO VERIFIED AND VALIDATED IN A FORMAL QA PROGRAM.

File: nuprasr3.zip (644 k).

horizontal rule

Service Release 2 for WinNUPRA 2.1.

This Service Release fixes all problems in Error Report WN21-05 through WN21-10.

Please download Service Release 3, which includes Service Release 2.

horizontal rule

Service Release 1 for WinNUPRA 2.1.

This Service Release fixes all problems in Error Report WN21-01 through WN21-04.

Please download Service Release 3, which includes Service Release 1.

horizontal rule

WinNUPRA 2.0

Service Release 3 for WinNUPRA 2.0.

This Service Release fixes all problems in Error Report WN20-11 through WN20-16.

You need to have WinNUPRA 2.0 installed on your computer to successfully install this Service Release.  If you need this Service Release for WinNUPRA 2.0, please contact me at dspiegel@scientech.com.

horizontal rule

  WinNUPRA 1.2

Service Release 4 for WinNUPRA 1.2.

You need to have WinNUPRA 1.2 installed on your computer to successfully install this Service Release.  If you need this Service Release for WinNUPRA 1.2, please contact me at 253-852-9070, or send an e-mail to dspiegel@scientech.com.

 

horizontal rule

WinNUPRA is a trademark of Scientech. All other products mentioned are registered trademarks or trademarks of their respective companies.
Copyright 2000-2011 Scientech All rights reserved.
Last modified: Wednesday October 05, 2011.

logo.gif (1174 bytes)